sparkhope4

Bio-Fires – An Eco-Friendly Alternative to Real Fires Biofires provide a warm, cosy form of heat with no harmful gasses or soot. They are easy to set up and operate, similar to electric fires. The BARDA contract supports the development of the BioFire emerging CoV panel, a nucleic acid amplifying test that can be used with BioFire filmArray Systems for the detection of known and emerging human acoronaviruses in nasopharyngeal or swabs as well as saliva samples. Eco-friendly Bioethanol is an eco-friendly alternative to wood or gas. The fuel is made from plant by-products and uses a natural process to convert sugars into alcohol. It is a better option than other fireplaces because it does not emit harmful emissions, and has less carbon footprint. Bioethanol is also a safer alternative to other fires as it does not produce smoke or soot. It does not require a flue and can be used in the garden or home. Multi-drug resistant bacteria (MDR) are one of today's most serious health threats. New testing methods can identify MDR bacteria early and avoid further complications. BioFire FilmArray is one of these tests. This test employs an approach based on symptoms to identify common pathogens that cause sepsis. The results are available within an hour, so healthcare providers can begin treatment right away. The process of Molecular PCR amplifies DNA and RNA molecules to millions or billions of copies. This allows for the analysis of small samples of body fluid or tissue to determine if specific genetic sequences are present. It is a valuable tool for lab professionals, and it can assist them in diagnosing serious illnesses in a timely and cost-effective way. The BioFire film array PCR system is an ingenuous tool for infectious diseases diagnosis. It can be utilized in many environments including laboratories and hospitals. For respiratory tests it is possible to use a simple swab to be wiped across your nose and sent to the lab for analysis. BioFire’s system allows clinicians to respond quickly and with a short turnaround time. This means that patients will enjoy better outcomes and will spend less time waiting for results. The Chanouf Farm Biofire company has developed an agroforestry recycling unit that uses pear and olive waste to produce organic charcoal and biomass power. The products that result are sold to the general public as an eco-friendly alternative to traditional wood charcoal and coal briquettes. Bio-waste products are suitable for burning in a Kachelofen-fire, which produces radiant heat and is a greener alternative to gas or electric fires. Clean burning With a bio-fire you will not only conserve energy, but also aid the environment. This is because the combustion of bioethanol doesn't produce any harmful gases such as carbon dioxide. It only releases water vapour and heat. This makes it a safer and cleaner option for indoor use. Ethanol is made from the fermentation of sugars in plants and is classified as a renewable fuel source. It is produced in a short time and will not run out as fossil fuels like coal and oil. bio ethanol fuel fire fireplacesandstove reduces dependence on imports from foreign countries and increases the chance of shortages. Bio-fires can be set up easily, and can be placed in existing fireplace openings, or as standalone units. This makes them a convenient alternative to wood and gas fires. They're also an excellent choice for homes and offices without a chimney or flue. When a bio fire is lit, a specific media is created inside the burner that absorbs the liquid fuel ethanol while making it ready to burn. The ethanol is then burned by the flames and the vapours are emitted out into the atmosphere through the vent. The flames appear more natural and gives an amazing beauty that cannot be replicated with gas or real wood fires. Bio-fires benefit from not needing a vent or flue to replenish oxygen used in the process of combustion. They also don't release the carbon monoxide that must be vented out into the room in gas fires that are open-fronted. The BioFire Respiratory Panel employs multiplex PCR technology to simultaneously test for 19 respiratory pathogens within an hour. This enables doctors to identify and eliminate respiratory diseases quicker than they could by using standard tests that require patient visits. Both patients as well as the health system gain from this. Safe indoors Bio-fires can be used indoors safer than real fires, since they don't emit smoke, ash, or carcinogenic fumes. They don't release carbon monoxide, which can be harmful if inhaled. However the bio-ethanol fuel is flammable and you must be careful when handling your burner and refilling it. It should be topped up only after the burner has been shut off and the fire is cool, and any spills should be cleaned immediately. The company's diagnostic FilmArray system, BioFire Torch and BioFire 2.0—are user-friendly and able to run eight different diagnostic panels approved by the US Food and Drug Administration, three additional panels authorized for use in emergency situations and six environmental test panels. These tests include a respiratory test panel designed to quickly detect and differentiate respiratory diseases such as COVID-19, emerging coronaviruses, and COVID-19. The Biomedical Advance Research and Development Initiative, which is part of the US Department of Defense Strategic Access Program, has awarded the COVID-19 panel a grant. The COVID-19 test is an antigen-based system, allowing clinicians to distinguish the symptoms caused by COVID-19 and other respiratory infections with the same precision as the current rapid antigen tests in use. The company is also working on a test for SARS-CoV-2 for its Respiratory Panel 2.1. The multiplexed nucleic acid amplification assay will be available on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 and 21 other respiratory pathogens in nasopharyngeal and saliva specimens within less than an hour. The test will be developed within the shortest timeframe, and FDA approval for EUA and the 510(k) will be expected to be granted in Q3 2020. Bio-ethanol flame effect fires are safe to use, however they should be kept clear of objects that are combustible, such as pillows, curtains and blankets. They should not be set close to anything that may catch fire and you should keep flammable items at least 10 feet from them. The bioethanol fuel should be kept in a dry, secure location that isn't easily accessible by pets or children. Simple to use A bioethanol fireplace is simple to install and has no flue to worry about. You only need a place to store it as well as fuel. Once you've filled the burner and lit it, ignite it. This will produce the appearance of a fire that is like a real fire. Once the flame is started it will heat the room, but it will emit little or no smoke. It also produces plenty of heat, similar to what a wood-burning fire would. Bio fires are easy to maintain, and don't need any servicing, just the odd cleaning. The BioFire RP2.1 Test, EZ unlike other tests that employ a syndromic method to identify common infectious diseases symptoms it can give results in 45 minutes. This test is designed for patients suffering from respiratory symptoms that are upper respiratory and has a 98% sensitivity rate. The test can identify 19 viruses and 3 bacteria in a single sample, making it an excellent option for managing patients. The BioFire system integrates multiplex PCR testing, sample preparation and report on results into an integrated platform. This allows laboratories to simplify their workflow and eliminate the need for a sequential method that involves sending out individual tests. This could lead to better patient outcomes, as the correct test is selected first time, and the need for costly tests based on culture is eliminated. Additionally, the BioFire system can detect pathogens as well as their antimicrobial resistance genes at an molecular level, providing data that is more precise than traditional methods. Molecular diagnostics is increasingly used to improve the outcomes of patients and care. The BioFire panel RP2.1+ employs an syndromic technique to simultaneously focus on 23 pathogens that are commonly implicated in respiratory infections. The test can be performed on the BioFire FilmArray 2.0 and Torch systems, and delivers results in about 45 minutes. This assay is available in the US under FDA Emergency Use Authorization. It will be available commercially after the initial DoD requirements are met. Additionally the BioFire Defense Team has developed an automated, sample-toresult assay for the rapid identification of COVID-19. The test is currently in development and will be made available once initial DoD demands are met.